Steering Cylinder Hold-Down Clamps with Weld Plate and Hardware
Steering Cylinder Hold-Down Clamp with Weld Plate and Hardware
Sold As EACH
Don't see what you need or need help making a decision on which product is right for your project?
Contact Us
DIMENSIONS:
2.25" SCCL01KF: 5.0" L X 4-1/2" T X 1.0" THK, 2-11/16" Bottom of Base-To-Cylinder Centerline
2.50" SCCL04KF: 5.0" L X 4-1/2" T X 1.0" THK, 2-11/16" Bottom of Base-To-Cylinder Centerline
2.75" SCCL06KF: 5.0" L X 4-1/2" T X 1.0" THK, 2-9/16" Bottom of Base-To-Cylinder Centerline
ALL: Weld plate threaded holes accept 1/2-13 bolts and are spaced 4.0 inches center-to-center
3.0" SCCL05KF: 6.0" L X 5-5/16" T X 1.0" THK, 3.0" Bottom of Base-To-Cylinder Centerline
Weld plate threaded holes accept 1/2-13 bolts and are spaced 4.6875 inches center-to-center
APPLICATIONS:
2.25 Inch SCCL01KF (2.640" ID) - Use with SC2209 and SC2226
2.50 Inch SCCL04KF (2.875" ID) - Use with SC2212, SC2213, and SC2218
2.75 Inch SCCL06KF (3.145" ID) - Use with SC2227
3.00 Inch SCCL05KF (3.345" ID) - Use with SC2217 and SC2228
| Warning | Cancer and Reproductive Harm www.P65Warnings.ca.gov |
|---|---|
| Custom Stock Status | In Stock |